Kentucky’s Combine Checklist to Prevent Wheat Bin Pests

In anticipation of the beginning of combine season, please check the following  resources to minimize stored grain losses or quality deductions.

High humidity has prevailed throughout much of southern New Jersey since Mid-May with most days registering above 90 degrees relative humidity. The rain event beginning on May 27th brought and inch to two-inches of rainfall to some areas of Salem County where small grains are rapidly maturing and lanternfly nymphs in rosebeds are rapidly emerging.

Memorial Day weekend gave producers a three day window to mow, swath and rake hay for dry baling today and tomorrow before thunderstorms are forecasted. Remember, last year was a high grasshopper egg laying season. If you noticed a significant number of grass hoppers in hay swathing or wheat combining this month, be on the alert for increasing grasshopper pressure on all other crops going into the rest of the summer.

 

Kentucky Pest News:

IPM 20-point Checklist for Controlling Insects in Stored Wheat

Other resouces for producers monitoring disease at this time:

Table 3 summarizing some observed weather conditions required for toxin production in grain crops: A great resource on grain mycotoxins.

https://www.extension.iastate.edu/grain/topics/MycotoxinsintheGrainMarket.htm

 

Corn emerging. Scout now for black cutworm

On May 3, 2022, Penn State Extension reported a significant number of black cutworm moths in traps in Lebanon and Lancaster County. In general, it takes about 300 growing degree days for the moth larva to emerge and begin cutting corn.

This year, this is coinciding with emergence of field corn. And, of note is the shift in cultural practices this year due to high input costs and low availability resulting in higher than normal late terminated cover crop residue still present in the field as corn is emerging.

According to the Climate Smart Farming Growing Degree Day Calculator provided by Cornell University, as of May 25, Salem County has had 300 growing degrees day accumulated (base 50) since May 3rd.

Cumulative Growing Degree Days Salem County Since May

What to consider:

  • Corn after soybeans, corn after wheat and reduced tillage more likely to have higher cut worm issues
  • Fields with high rye residue, or weed residue are more likely to have higher cut worm issues
  • Fields planted into hay recently terminated
  • Fields with higher water table, ponding areas
  • If cutworm are about 1 inch long or less; and plants are less than 6 leaf stage; and plants are cut below the soil surface; in these situations likely to see economic injury justifying rescue treatment in that area.
  • Economic thresholds are triggered typically when 2% to 3% of the area infested are showing signs of active feeding. But this is an atypical year for cutworm corn economics and producers should factor in all considerations which in general will lower the tolerance to 1% cut or wilted and small larva to 3% cut or wilted in larger larva.

For more information see the following publications: https://extensionpublications.unl.edu/assets/pdf/g1153.pdf

https://entomology.ca.uky.edu/ent59

and,  a note about corn economics related to cutworm in https://extension.umn.edu/corn-pest-management/black-cutworm#economic-thresholds%3A-when-to-treat-a-problem-1185760

Vegetable IPM Update

Due to subnormal temperatures and storms, there has not been enough pest activity to warrant producing maps.

Sweet corn

European corn borer moths have now been trapped in Gloucester and Salem County blacklights.  This is the beginning of the first, over-wintering generation of moths whose numbers will increase over the next two to three weeks.  The most common strain of corn borers has two generations per year and sometimes a partial third.  Corn borers attack a wide range of crops including potatoes, tomatoes, peppers, and others, as well as sweet corn.

[Read more…]

Management Recommendations SLF nymphs in 2022

By Katarzyna Madalinska and Anne Nielsen

New Jersey is currently in its 5th year of invasion from spotted lanternfly. Populations are now widespread throughout the state and have established in almost every county in NJ. SLF pressure is variable throughout NJ’s counties, and we do not currently have a threshold for management of nymphs.

1st instar SLF in NJ vineyard – photo by K. Madalinska

SLF nymphs are hatching throughout the state and will continue to do so in the coming weeks. Despite seeing nymphs within the vineyard, we do not recommend immediate treatment at this time. Hatch will occur over a multiple week period depending on the site of egg masses and exposure. The early instars feed on new growth, particularly the underside of leaves and shoots. At this point there is no evidence that early instar feeding results in plant injury or yield loss. Peak abundance of SLF nymphs in vineyards is during their 1st to 2nd instars approximately and 2-3 weeks after the first hatch. Management during their 2nd instar will target the highest number of individuals and prevent additional treatments against nymphs. This timing typically coincides with other key pests within the vineyard, such as grape berry moth and Japanese beetle. Many broad-spectrum insecticide options for grape berry moth or Japanese beetle will also effectively kill SLF nymphs (see table) and insecticides against SLF will not be needed until the adult stage.

Trade name Active ingredient Class Rate per acre Seasonal Allowance SLF* GBM JB
Brigade 2EC bifenthrin Pyrethroid 3.2-6.4 oz 6.4 oz E* E
Actara thiamethoxam Neonicotinoid 3.5 oz 7.0 oz E* G
Assail 30SG acetamiprid Neonicotinoid 2.5-5.3 oz 2 times G G F
Carbaryl 4L carbaryl Carbamate 1-2 qt 10 qt E G G
Avaunt indoxicarb Oxadiazine 6 oz 12 oz. E* G G
Danitol 2.4EC fenpropathrin Pyrethroid 16-21.33 oz 42.66 oz E* E E
Belay clothianidin Neonicotinoid 2.0–6.0 oz. 12 oz. G G G
BaythroidXL cyfluthrin Pyrethroid 1.6-3.2 oz 12.8 oz E E

Always consult the label for further instructions.

*2(ee) approved for SLF in NJ grapes

E = excellent control
G = good control
F = fair control

Ideal conditions for wheat quality. What does this mean?

Since last week, the critical period of fifteen to eighteen days for wheat crop grain quality and quantity has been underway in much of south-central New Jersey and Pennsylvania. This period occurs when heads begin to emerge from the flag leaf (flowering) followed by pollination through to dough stage. While we can’t rule out bacterial and pest damage going forward, we can anticipate how fungal pathogens might impair wheat yields by looking back at the weather since the flag leaf emerged and this week’s coming forecast as pollination completes.

Current predictions for the fungal grain pathogen of wheat known as fusariums as of May 13th are low for much of the region with just a few areas along the Delmarva Penninsula considered at high risk. The Fusarium Risk Tool developed by researchers at Ohio State, Penn State, and Kansas States can be found at https://www.wheatscab.psu.edu/

Fusarium’s are naturally occuring fungi in soil that can infect small grain seed heads when conditions are ideal for infection. For high yielding wheat, ideal weather includes humidity in the range of 50 to 60%. Ideal conditions for fusarium risk are when humidity levels rise to 100% and stay there during this critical period of grain development. While they may sporulate at lower temperatures and humidity levels, they rarely mature until humidity climbs above 85%.

Let’s take a look back and see how the weather has favored the winter wheat crop in our area using local conditions for Woodstown, NJ.

Weather May 1 to May 10. Coming into head emergence, the low humidity periods on May 1 (below 40%) for six hours, three hours on May 3 and five hours on May 5 were offset by the number of hours and days above 68% humidity but mostly below 89% humidity except for a high of 93% on May 4. Chances for diseases to sporulate were highest on May 6 through May 8, but humidity levels did not rise above 90% and temperatures were below 60F degrees even dropping into the low 40’s. Yellow rust Puccinia striiformis in particular if present might have sporulated under these conditions. Powdery mildew could also have sporulated as these conditions were in the lower end of it’s ideal range. The key consideration is that sporulating conditions did not remain so for a long period of time on May 9 and May 10 when humidity dropped into the mid to low 20% range and temperatures hovered in the low 70’s, less than ideal for most fungal pathogen development of concern.

To learn more about specific wheat diseases see USDA’s Guide to Wheat Diseases and Pests at https://wheat.pw.usda.gov/ggpages/wheatpests.html

Weather May 11 to May 13. Most fields in Salem County are nearly fully headed and shedding pollen with little signs of flag leaf disorders. Other than uneven canopy heights on some poorly drained heavy clay soils, much of the sandier loam fields are sporting a good rating at this time. The critical period for any required fungicide applications is now through the next few days. Humidity levels stayed well below 80% until 11 pm on the 12th but have remained above or near 90% for the last twelve hours.

What’s in store? Today with overcast skies and a steady light rainfall this morning in Woodstown, NJ, the humidity rose into the low 80’s and temperatures hovering around 75F degrees. The forecast for Saturday has humidity at 80 to 88% then dropping on Sunday to below 83% and below 76% on Monday, and below 54% for the rest of the week. All things considered, a good forecast this next week going into a critical period of wheat quality and grain fill.

Keep in mind these observations are under natural conditions and non-irrigated. Those who rely on irrigation and have been using irrigation on winter wheat during flag leaf development must pay particular attention to humidity levels in the wheat canopy, especially when cloud cover and higher air temperature persist for long periods of time.

 

ALERT-Potential for new boxwood blight infections tomorrow in Southern NJ

There is a potential for new boxwood blight infections tomorrow in Southern NJ

  • Protective fungicide applications should remain in effect or be initiated immediately for Boxwood Blight in these areas
  • If your area is not listed (throughout all of NJ please visit the USPEST.ORG Boxwood Blight Risk Model – CLICK HERE TO CHECK YOUR LOCAL PREDICTIONS
  • BWB has been observed already this season just south of us in Maryland.

Boxwood Blight risk-model information, considerations, and links:

Boxwood Blight Risk Assessment as of 5/4/2022
Region Location CODE 4-May 5-May 6-May 7-May 8-May 9-May
Southern Upper Deerfield NJ50 Low  Low  Very Low  Low  Low  Very Low 
Southern Vineland NJ73 Low  Low  Very Low  Low  Low  Very Low 
Southern Millville KMIV Very Low Low  Very Low  Low  Low  Very Low 
Southern Bridgeton D4116 Low Infection Risk- Sus. vars. Very Low  Low  Low  Very Low 
Please check your local boxwood blight risk at ___ CLICK HERE TO CHECK YOUR LOCAL PREDICTIONS
  • These advisories are general in nature and change rapidly over time and throughout the state! Someone from your business should be using this risk model daily if boxwood is important to your financial stability – In 30 seconds you can have a better idea of boxwood blight (and other pathogen) activity in your immediate area!
    • (click on the link – input area code – select closest weather station – check 7-14 prediction – click on graph / table) 

Fungicides; 

  1. You very well may have these materials already applied as ‘cover-sprays’ – But – be mindful that protectant fungicides loose efficacy the more rain (or overhead irrigation) they are subjected to, and reapplication may be warranted.
  2. ROTATE between Fungicide Resistance Action Committee (FRAC codes) to avoid this pathogen becoming resistant to specific chemicals

Format: [FRAC code]: Chemical name (Trade names * no endorsement implied) 

  • [M05]: Chlorothalonil (Daconil WS)
  • [M05 + 1] Chlorothalonil + Thiophanate methyl (Spectro 90WDG)
  • [11] Trifloxystrobin + [7] Fluopyram  (Broadform)
  • [11] Trifloxystrobin + [3] Triadimefon (Armada 50WDG)
  • [M03] Mancozeb
  • [12] Fludioxonil (Medallion WDG)
  • [3] Tebuconazole (Torque)BW

DISCLAIMER: The label is the law, always refer to it for allowable host crops, use-restrictions, application rates, reapplication intervals, re-entry intervals (REI), and mix compatibility information. Production and pesticide information on this site are for private/commercial pesticide applicators and landscape professionals only, and are NOT for home gardener use. Provided materials represent examples and do not cover all possible control scenarios. Trade-names listed do not imply endorsement and are used as examples only. Please contact your local agent or chemical sales representative for more information or to discuss additional pest management options.

Resources 

Background on the pathogen: