February 1, 2022

Tips in Preparation of Herbicide Shortages in 2022

By Lynn M. Sosnoskie (Cornell University) and Thierry E. Besançon (Rutgers University)

Many growers in the US have been focused on predicted herbicide shortages in the upcoming field season. While the primary concerns have surrounded glyphosate and glufosinate, there is increasing apprehension that active ingredients of importance to vegetable growers may also be affected. Although the supply change is dynamic, chemical stocks may become, and remain, tight at the local or regional level as growers try to fill gaps in their toolboxes. Heading into the new year, consider the following for the 2022 season.

  1. Successful weed identification, regular scouting, and detailed field records are crucial for optimizing weed control success. The first step in developing a novel herbicide program is knowing what species are present and determining which combination of products will be the most effective (and affordable) at suppressing them. Not all active ingredients are equally useful against all species and careful consideration needs to be paid to each chemical’s spectrum of control.
  2. Familiarize yourself with chemical substitutes before applying them over many acres. Some switches may be intuitive (e.g. using Poast (sethoxydim) or Assure II (quizalofop) in place of clethodim where allowed) while others may be more complicated (e.g. using a tank-mixture in place of a single product). In addition to knowing a novel product’s target species, become acquainted with a new herbicide’s labeled rate structure and spray volume, use patterns (e.g. application timing), environmental limitations (e.g. temperature restrictions), adjuvant requirements, and potential interactions with tank-mix partners. Not all chemicals are compatible with each other, and antagonism can reduce weed control efficacy while enhancing crop injury concerns. Contact your Extension Specialists if you have any doubt regarding physical compatibility and efficacy of herbicide mixtures. Herbicide damage may be observed across seasons so pay attention to rotation restrictions. Some active ingredients may already be part of registered pre-mixes in certain crops (i.e. bentazon, which is the active ingredient in Basagran, is also part of Varisto).
  3. Soil-applied, preemergence herbicides can be useful tools for suppressing weeds that emerge with the crop; these plants are the most injurious as early season competitors are very likely to reduce yields. Like postemergence products, soil-applied herbicides must be carefully selected to balance crop safety with weed control needs. Pay attention to rate requirements according to soil type, as this can influence both efficacy and injury. Pre-emergence herbicides need to be moved into the soil solution (either physically or via rainfall or irrigation) where they are taken up by emerging weed seedlings; delays in incorporation can reduce overall performance if some weeds continue to germinate and emerge under low soil moisture conditions. Delays in herbicide activation may facilitate the degradation of some products susceptible to breakdown in sunlight (i.e. photolysis). When possible, use overlapping residual products to suppress weed emergence throughout the season. Some active ingredients (e.g. oxyfluorfen (Goaltender)) may have both preemergence and postemergence activity.
  4. Timing matters. Postemergence weed control should be undertaken when weeds are small and succulent. Herbicide labels will have specific recommendations regarding the optimal size for treatment. Because many foliar-applied herbicides can also damage crops, always follow label guidance to reduce risk of injury. For instance, in 2021 New York research trials, applications of postemergence herbicides made before the first trifoliate leaf stage in snap beans resulted in up to 20% yield loss because of crop stunting.
  5. Optimize herbicide application rate for postemergence (i.e. foliar) applications. Target using the lowest effective herbicide rate to stretch your herbicide supply. For example, instead of using 32 or 44 oz/acre of a Roundup brand product, consider using the standard rate on the label such as 22 oz/acre for Roundup PowerMax. Again, timing of application with regards to weed size will be critical to optimize your herbicide supply. The smaller the weeds, the less herbicide you will have to apply to control it! Therefore, frequent scouting as highlighted in point one will be very important to optimize your herbicide application and stretch your herbicide supply.
  6. Don’t skimp on adjuvants. If herbicides are going to be in short supply, then there may be fewer shots to control weeds. If there are fewer shots available, make every shot count as much as possible. Follow label recommendations regarding the inclusion of water conditioners, surfactants, etc…, to maximize product efficacy. Refer to point number two about potential compatibility concerns when tank-mix partners are involved.
  7. Consider non-chemical weed control strategies when and where appropriate. This includes hand weeding, cultivation, altering planting dates to avoid particularly troublesome species, and using stale seedbed practices. Like herbicides, physical and cultural practices are not always effective against all species. While cultivation can control many weed seedlings, particularly at the white-thread stage, soil disturbance is less effective against well-developed plants. In the case of some perennials (for example, field bindweed or Canada thistle), cultivation events can break up and disperse root fragments within and across fields, facilitating dispersal. Ultimately, plan for hand-weeding escapes prior to the weeds setting seed as this will help reducing the weed seedbank for future growing seasons.

2022 could be a difficult year if many crop production and protection chemicals are limited. Herbicide shortages could impact weed control success in the coming growing season…and beyond. Weeds that are not controlled in 2022 will set seed that will cause problems in the future. Planning now can help with weed management in both the short and long term.

Filed Under: Blueberry, Commercial Ag Updates, Cranberry, Fruit, Strawberry, Tree Fruit, Vegetable Crops, Wine Grape Tagged With: , , ,
November 9, 2021

Fall Weed Control in Tree Fruit Crops

Two applications of residual herbicides plus postemergence (if needed) herbicide are recommended annually in the weed free strip under the trees. The first application should be applied in late fall, after the trees are dormant, but before the soil freezes, or in late winter before the trees’ buds break in the spring.  This application targets the control of winter annuals and provides early season control of summer annual weeds.  Most growers are more easily able to apply herbicides to the orchard in late fall, usually after Thanksgiving in New Jersey. Consider a labeled glyphosate product if perennial weeds are present and spot-treatment is recommended in the fall.

Most residual herbicides primarily control annual grasses or broadleaf weeds.  A combination of an annual grass herbicide and an annual BLW herbicide is usually recommended.  Rate ranges are recommended for most residual herbicides depending on the soil texture. Refer to the herbicide label to determine the appropriate rate for your soil texture.  Consult the 2021/2022 New Jersey Commercial Tree Fruit Production Guide for rates and additional information. https://njaes.rutgers.edu/pubs/publication.php?pid=e002

Residual herbicides applied in fall are the most effective at preventing weed emergence when:

  • Applied on unfrozen bare ground so that herbicide spray is not intercepted by weed residues at the surface of the soil.
  • Applied before targeted weed germinate. If weeds have already emerged, use a residual herbicide with postemergence activity or tank-mix a postemergence herbicide.
  • Applied at the appropriate rate for your soil texture.
  • Receiving enough water within (at least 0.5”) 7 to 10 days after application so that herbicide can be “activated” (penetrate into the ground) and protected from photo-degradation or volatilization.

Herbicide application should be accomplished with a “conventional” fixed-boom sprayer calibrated to accurately deliver 40 to 60 gals. of water/A using flat fan nozzles and 30 to 40 psi, unless otherwise stated.

Weed-free strip for newly planted trees should only be sprayed with herbicides labeled for use on newly planted trees. Additionally, newly planted trees should systematically be protected from potential injury by a tree guard, a waxed container, or another non-porous wrap or guard.

Broadleaf Weeds and Grasses Residual Herbicides for Fall Application

  • Alion 1.67SC (indaziflam). Use 5 to 6.5 fl. oz./A Alion 1.67F. Apply in late-fall to weed free soil, or add an appropriate postemergence herbicide to kill existing vegetation. Primarily for the control of annual broadleaf weeds and annual grasses. Tank-mix with Prowl H2O or Solicam DF to improve annual grass control. Tank-mix with Chateau 51SW, Karmex or Princep 4L to improve annual broadleaf weed control. Alion does not leach readily, and therefore requires significant rainfall for “activation”; therefore, Alion should be preferentially be applied in fall. Apply to stone fruits and pome fruits established a minimum of 3 years.
  • Casoron (dichlobenil). Use 100 to 150 lbs./A Casoron 4G or 1.4 to 2.8 gals/A Casoron CS (Casoron CS is currently unavailable) Apply between 11/15 and 02/15 (before weed growth begins and daily high temperatures exceed 50°F) to control labeled annual and perennial/biennial weeds. Casoron is volatile in warm temperatures and must be irrigated or incorporated immediately after application if applied in warm weather. For apples, pears, and cherries established a minimum of 1 year.
  • Chateau 51SW (flumioxazin). Use 6 to 12 oz./A of Chateau 51SW. Chateau controls many annual broadleaf weeds, and controls or suppresses annual grasses. Tank-mix with Prowl H2O, Surflan 4AS, or Solicam 80DF to improve control of annual grasses. Do not apply to trees in the field less than one year old unless trees are protected by a tree guard, a waxed container, or another non-porous wrap or guard. Do not use more than 6 /A in orchards where the soil contains more than 80% sand (sands and loamy sands) until the trees have been in the field for three years. For newly planted AND established apples, peaches, pears, plums, and cherries.
  • Zeus Prime XC (sulfentrazone + carfentrazone). Use 7.7 to 15.1 fl oz./A Zeus Prime XC. Zeus Prime XC primarily controls annual broadleaf weeds. It also suppresses yellow nutsedge at the highest labeled rate. Thus, Zeus Prime XC is a better fit for early spring residual herbicide treatments in orchards infested with yellow nutsedge. Tank-mix with Prowl H2O, Surflan 4AS, or Solicam 80DF to improve control annual grasses. Sequential applications of Zeus Prime XC can be applied when directed as a banded application (50% band or less of orchard floor) so long as total use rate does not exceed 15.1 fl. oz/A on a broadcast basis within a year and the second application is not applied within 60 days of the initial application. For apples established a minimum of 3 years.

 Broadleaf Weeds Residual Herbicides for Fall Application

  • Karmex (diuron). Use 1.25 to 3.75 lbs./A Karmex 80DF or 1 .0 to 3.0 qt./A of Direx 4L. Primarily for annual broadleaf weed control. Tank-mix with Prowl H2O or Solicam DF to improve annual grass control. Use one-half the labeled Karmex rate when used alone for the soil type, to improve crop safety, and the range of weeds controlled when tank-mixing with an annual grass herbicide. Apply to apples and pears established a minimum of 1 year, and to peaches established a minimum of 3 years.
  • Princep (simazine). Use 2.2 to 4.4 lbs./A Princep 90DF or 2.0 to 4.0 qt/A Princep 4L. Primarily for annual broadleaf weed control. Prowl H2O or Solicam DF to improve annual grass control. Use one-half the labeled Princep rate when used alone for the soil type, to improve crop safety and the range of weeds controlled, when tank-mixing with an annual grass herbicide. Apply to apples, cherries, peaches, and pears established a minimum of 1 year.
  • Motif 4L (mesotrione). Use 6 fl. oz./A Motif 4L. Provides both residual and post-emergence control of susceptible broadleaf weeds, and is especially effective for the control of horseweed and common lambsquarters. Tank-mix with an annual grass herbicide to provide control of annual grass. Do not apply more than 12.0 fl. oz./A in one year. Do not use on soils containing greater than 20 percent gravel. Apply to apples, pears, peaches, and plums established a minimum of 1 year.
  • Trellis 4.16 SC (isoxaben). Use 16 to 31 fl oz./A Trellis SC. Apply in late-fall to control many small-seeded broadleaf weeds. In newly planted trees, allow the soil to settle and fill any depressions around the tree before application. ank-mix with an annual grass herbicide to provide control of annual grass. For newly planted apples, peaches, pears, plums, and cherries, AND For established apples.

Grasses Residual Herbicides for Fall Application

  • Surflan 4AS (oryzalin) Use 2 to 6 qts./A Surflan 4AS. Use the high rate for long-term control (4 to 8 months) and the low rate for short-term control (2 to 4 months). Surflan primarily controls annual grasses. Tank-mix with Princep or Karmex to control annual broadleaf weeds. Apply half the yearly labeled rate in the late fall/winter, and the second half in late spring. For newly planted AND established apples, peaches, pears, plums, and cherries.
  • Prowl H2O 8SC (pendimethalin). Use 2 to 4 qts./A Prowl H2O. Use the high rate for long-term control (4 to 8 months) and the low rate for short-term control (2 to 4 months). Prowl primarily controls annual grasses. Tank-mix with Princep or Karmex to control annual broadleaf weeds. Apply half the yearly labeled rate in the late fall/winter, and the second half in late spring. For newly planted apples, peaches, plums, and cherries AND for established apples and peaches.
  • Solicam 80DF (norflurazon). Use 2.5 to 5 lbs./A Solicam 80DF. Primarily for annual grass control, Solicam may provide partial control of many broadleaf weeds. Tank-mix with simazine plus Princep or Karmex to improve the control of broadleaf weeds. For newly planted apples and peaches AND established apples, cherries, peaches, plums, and pears.
  • Kerb 50WP (pronamide) – Restricted use pesticide. Use 4 to 8 lbs./A Kerb 50WP. Apply in November when soil temperatures are between 35° and 55°F. Primarily controls perennial grasses, including quackgrass, bluegrass, ryegrass sp., fescue sp., and provides early control of annual grasses the following spring. Tank-mix with Princep for postemergence and residual broadleaf weed control. For established apples, peaches, pears, plums, and cherries.

Postemergence Herbicides for Tank-Mixing with Residual Fall Herbicides

  • Embed 3.8SL (2,4-D choline). Use 1 to 4 pts./A Embed to control a wide variety of broadleaf weeds. Effectiveness depends on herbicide rate, weed species, and growth stage. Apply to weed foliage in the fall after harvest. Fall applications are more effective and reduce the risk of herbicide drift injury to adjacent crops. Weeds are most susceptible to 2,4-D when they are growing vigorously, not under stress, and before flower buds appear. Apply before the leaves of perennial weeds lose normal, summer green color. DO NOT apply on loamy sand or coarser soils. For established (bearing) apples, peaches, pears, plums, and cherries.
  • Gramoxone 2SL (paraquat) Restricted use pesticide. Use 2.5 to 4 pts./A Gramoxone SL2.0. Contact killer only; no translocation or residual activity. Best results occur when weeds are 6 inches tall or less. Regrowth may occur from the root systems of established weeds. Use a surfactant to be 0.25% of the spray solution (1.0 qt./100 gals. of spray solution). DANGER: Do not breathe spray mist. Read safety precautions on the label. For newly planted AND established apples, peaches, pears, plums, and cherries.
  • Rely 280 2.34SL (glufosinate). Use 48 to 82 fl oz/A of Rely 280 to control most annual broadleaf and grass weeds plus some perennials. Apply as a directed spray at a minimum of 20 GPA. The addition of ammonium sulfate will enhance glufosinate activity on difficult to control species; however, the addition of surfactants and crop oil will increase risk of crop injury. For optimal performance, spray under cloudless conditions and when sun is high in the sky. Do NOT allow Rely to contact ANY GREEN, IMMATURE PART or SUCKERS of the tree. For newly planted and established apples, peaches, pears, plums, and cherries.

Work conducted by Dr. Brad Majek a few years ago indicated that direct application of glufosinate to the mature brown bark of the lower trunk may cause severe injury by killing the cambium layer at the point of contact. However, this type of injury is not systematically associated with glufosinate application as we observed it in a trial conducted in 2017 at the Snyder Research Farm on mature “Pink Lady” apple trees which were not damaged following glufosinate application  (Rely 280 at 64 fl oz/A). Additionally, injury in the form of vertical cracks in the of trunk bark have also be observed on apple trees exposed to glyphosate (https://nyshs.org/wp-content/uploads/2016/10/Pages-23-28-from-NYFQ-Winter-12-12-2013.cmc_.pdf), not only to glufosinate.

As highlighted by Dr. Dave Rosenberger (retired Plant Pathologist at Cornell’s Hudson Valley Lab) on his blog (https://blogs.cornell.edu/plantpathhvl/2014/06/30/apple-summer-diseases-herbicide-problems-and-irrigation/), “NEITHER glyphosate nor glufosinate cause trunk injury to apple trees EVERY time that they are used or in every orchard in which they are applied”. Field reports suggest that injury is detected when trees are exposed to specific conditions that still need to be precisely defined. Dr. Rosenberg’s opinion is that “the potential for damage is significantly higher if tree trunks are hit with either of these herbicides during or just prior to periods of drought stress”. Under these drought conditions, “the additional desiccation from herbicide exposure may predispose the trunks to invasion by Botryosphaeria dothidea, a canker pathogen that is incapable of killing the cambium in healthy functioning trees, but which becomes very pathogenic in drought-stressed trees”. Dr. Rosenberg also suspects that similar injury can be observed on young trees following application of paraquat. Other stress factors, such as cold injury or previous bark damages, may also increase the risk of herbicide injury.

So, to safely apply glyphosate or glufosinate in peaches or apples, it is important following some guidelines that will help minimizing glufosinate damages to the bark. As specified by the label for glufosinate products and the Rutgers 2021-22 E002 Rutgers Tree Fruit guide, contact by the herbicide of parts of trees other than mature brown bark (including suckers) can result in serious damage. It is therefore especially important to protect young trees from potential glufosinate injury by wrapping them with grow tubes or waxed containers. For mature trees, the use of a shield boom is required for minimizing as much as possible contact between the herbicide spray and the tree bark. Shields will also minimize the bounce-back from bare soil that sometimes allows a haze of small droplets to drift upward into the trees. Avoid applications of herbicides during periods when trees are already experiencing water stress or where water-stress can be expected in the near future. Additionally, weed control efficacy of glufosinate can severely decrease when weeds are under heat stress. Keep the pressure as low as possible (no more than 30 psi) to minimize generation of small droplets. If not feasible, use air-induction nozzles to reduce the production of small droplets.

Filed Under: Fruit, Tree Fruit, Uncategorized Tagged With: , ,
May 25, 2021

Stinger herbicide 24(c) Special Local Need label renewed until 2025 for use on Highbush Blueberries

Blueberry bushes

Mugwort in blueberries is also called wild chrysanthemum due to its scent when the leaves are crushed.

The NJDEP informed us last Friday that the 24(c) Special Local Need label for use of Stinger (clopyralid) herbicide in highbush blueberries has been renewed for the 5 years with an expiration date set on December 31, 2025.

This is a really good news for the New Jersey Blueberry Industry as Stinger is a crucial herbicide for control of troublesome perennial weed species that has consistently showed excellent crop safety when used accordingly to the label recommendations. The new updated 24(c) label can be found on the Agrian database (https://www.agrian.com/labelcenter/results.cfm)

Stinger is a PRE and POST herbicide that is strong on weeds in the composite and legume families, such as thistles, asters, dandelion, goldenrod, ragweed, horseweed, clovers, vetch and wild bean. It also controls nightshades, smartweeds, wild buckwheat and plantain.

The maximum labeled rate of Stinger per application 5.3 fluid ounces per acre (0.125 lb acid equivalent/A), and the maximum rate per year application is 10.6 fluid ounces per acre (0.25 lb acid equivalent/A). However, the rate needed varies depending on the target species:

  • 2 fl ounces per acre (0.047 lb acid equivalent/A) will control seedling annual weeds such as common ragweed and annual vetch.
  • 3 to 4 fluid ounces per acre (0.070 to 0.094 lb acid equivalent/A) are needed to control perennial clover species, horseweed, and groundsel.
  • Most other susceptible perennial weeds require the full rate of 5.3 fluid ounces per acre (0.125 lb acid equivalent/A).

Optimum results controlling deep rooted and hard to control perennial weeds, including Canada thistle, perennial asters, goldenrod species, and mugwort (wild chrysanthemum) will be obtained if the Stinger application is split.

Apply Stinger at the rate of 5.3 fluid ounces per acre after blueberry bloom in early to mid-May when the weed is emerging. Some weeds can “survive” for months on established existing foliage even though Stinger suppresses all new growth. Tank-mix with another postemergence herbicide to increase the spectrum of weeds controlled. Be sure to spray adjacent sod and tilled row middles as well as the weed free strip under the blueberries. The application of Stinger timed to match the emergence of the perennial weed in the spring coincides with the time of year when the carbohydrate food reserves in the plant are at the lowest point. Treatment at this time reduces the weed’s chance of recovery and survival.

Apply another 5.3 fluid ounces per acre of Stinger to the marked rows, or sections of rows immediately after harvest in mid-summer. No growth of the target weed may be observed at the time of the second application. Spray the second application even though no growth of the target weed is evident. The second application is essential for the elimination of the hard to kill established perennial weeds. If the second application is skipped, expect to see the weed re-emerge in late August or September. Time all applications to maintain a 30 day PHI (PreHarvest Interval).

Stinger is both a postemergence foliar absorbed herbicide and a residual herbicide. The initial twisting and curling observed after application to susceptible species is due to the foliar absorbtion. Control of established perennials is due to residual Stinger in the soil which prevents re-growth from the roots. In certain species such as mugwort, Stinger prevents re-growth but does not kill the mature leaves. The plant will survive unless another herbicide such as Gramoxone or glyphosate is used to defoliate the plant.

Deep rooted perennials

Deep rooted perennials like goldenrod will require multiple Stinger applications.

Stinger can also be used as a wipe treatments by applying a 2% solution of Stinger in water (2.5 fluid ounces per gallon). Make a maximum of two applications with the total usage of Stinger from all types of applications not to exceed 10.6 fl oz per acre or 2/3 pint (0.25 lb acid equivalent/A) per acre per annual growing season.

Do NOT apply Stinger in a hand held sprayer used to “spray until wet”. Stinger is a residual herbicide that must be applied on a rate per acre basis. When treating “patches” of perennial weeds, apply the recommended rate per acre with a calibrated sprayer. Treat ten to fifteen feet beyond the weed “patch” on all sides. Spray the sod or row middles adjacent to the weed “patch” in the row.

Do NOT apply Stinger within 5 hours of expected rainfall or irrigation.

Do NOT permit Stinger to contact desirable foliage

 

 

 

Filed Under: Blueberry, Fruit Tagged With: , ,
March 5, 2021

2021 Recommendations for Residual Weed Control in Established Blueberry

Horseweed

Horseweed / Marestail

With T3 stage scheduled for early April  it’s now time  to consider your residual herbicide application before bud-break!

Residual herbicides should be applied prior to weed seed germination. If applied to weeds that are already out of the ground, most of these products will not control them.

Keep also in mind that these herbicides should receive at least ½” rainfall or irrigation one to seven days after application (depending on herbicides) to move the herbicide into the soil

 

 

In order to reduce the potential of selecting for herbicide-resistant weeds, it is highly recommended mixing two residual herbicides with different MOA whenever you apply pre-emergence (residual) herbicides. Make sure the herbicides you plan to apply will be effective at controlling the weed species in your field by checking the herbicide label. Usually, residual herbicides will suppress weed for 6 to 8 weeks depending on irrigation as well as soil and weather conditions. After this period, another residual herbicide can be needed to control weeds through harvest and could be mixed with a postemergence herbicides to control emerged weeds. Roundup (glyphosate), Rely 280 (glufosinate,) and Gramoxone (paraquat) are postemergence herbicides that may be applied with pre-emergence herbicides before bud break with little risk for crop injury.

  •  MOA 2: Solida (rimsulfuron) and Sandea (halosulfuron) are ALS inhibitors that have both preemergence and postemergence activity. They control most annual broadleaves but are weak on common groundsel, common lambsquarters and eastern black nightshade. Sandea is ONLY recommended for postemergence control of yellow nutsedge. However, these two herbicides will not control ALS resistant weeds (horseweed, ragweed…) already widespread in New Jersey. Thus, these herbicides should always be tank mixed with a partner effective at controlling these weeds
  • MOA 3: Kerb (pronamide) and Surflan (oryzalin) are mitosis inhibitor that will be effective at controlling many annual grass species for 4 to 6 weeks after application. Kerb also help controlling perennial quackgrass. If applied to warm soils (> 55°F), Kerb persistence (and weed control) is much reduced; therefore, reserve Kerb for fall/winter application. Do not use Kerb on blueberries that have not been established for about a year.
  • MOA 5 and 7: The photosynthesis inhibitors (PS II inhibitors) have a broad spectrum of control and will be effective against many broadleaves and annual grasses when applied in spring. Karmex (diuron) and Princep (simazine) have relatively low solubility and have been very safe on blueberries. Sinbar (terbacil) has a longer residual life in the soil and also is more soluble, so it should be used infrequently on light, wet soils. Velpar (hexazinone) is very soluble and should not be used on New Jersey sandy soils. These herbicides are effective on a many broadleaf weed species, including common chickweed, common lambsquarters, common groundsel, henbit, nightshade, redroot pigweed, pineappleweed, shepherd’s-purse, smartweed, and some mustards. Sinbar and Princep will also control most of the annual grasses and help suppressing quackgrass.
  • MOA 12: Solicam (norflurazon) is a pigment inhibitor that may be applied in fall or early spring primarily for annual grass control and quackgrass suppression. Solicam may also provide partial control of many broadleaf weeds as well as of yellow nutsedge. Do not use Solicam on blueberries that have not been established for about a year.
  • MOA 14: Chateau (flumioxazin), Zeus XC (sulfentrazone), and Zeus Prime XC (sulfentrazone plus carfentrazone) are PPO inhibitors with activity against many broadleaves (including redroot pigweed, catchweed bedstraw, common mallow, common lambsquarters, ladysthumb, wild mustard, and shepherd’s-purse) when applied preemergence in spring. Chateau and Zeus Prime XC also have some postemergence activity on newly emerged seedlings of annual weeds. Zeus products may also provide some suppression of yellow nutsedge. Chateau has a 7 day preharvest interval (PHI) and Zeus Prime XC have 3 day PHI, and can therefore be applied later in the season to extend preemergence broadleaves control into late summer. Blueberry plants must have been established at least two years prior to use of these herbicides.
  • MOA 15: Devrinol (napropamide) and Dual Magnum (s-metolachlor) are long chain fatty acid inhibitor. Devrinol will provide good control of annual grasses and should therefore be tank mixed with a PSII or a PPO inhibitor for controlling broadleaf weeds. Devrinol is rapidly degraded if left exposed on the soil surface, so it should be applied less than 24 hours before a rain event to incorporate the herbicide in the soil. Dual Magnum has a 24c Special Local Need label for blueberry in New Jersey. This herbicide controls many annual grasses and some small-seeded broadleaf annual weeds such as redroot pigweed, nightshade and common purslane. Dual Magnum also suppresses emergence of yellow nutsedge. Use Dual Magnum only on plants established for more than one year, and lower rates are suggested on 2- to 3-year-old plantings.
  • MOA 20: Casoron (dichlobenil) is a cellulose synthesis inhibitor recommended for fall application to control many annual and perennial broadleaves, grasses and yellow nutsedge. If left on the soil surface or if applied to warm soil (> 55°F or 70°F depending on dichlobenil formulation), Casoron can lose much of its activity. So, reserve this herbicide ONLY for fall/winter applications. Plants must be at least one year old before Casoron should be used.
  • MOA 21: Trellis SC (isoxaben) is a cell wall synthesis inhibitor currently currently registered for bearing and non-bearing blueberry. Trellis SC primarily controls annual broadleaf weeds, such as horseweed, common lambsquarters, wild mustards, shepherd’s- purse, purslane, and common chickweed; higher rates may also suppress field bindweed and curly dock. However, Trellis SC will have to be mixed with a Group 3, 12, or 15 residual herbicide for controlling annual grasses.
  • MOA 27: Callisto (mesotrione) is an HPPD inhibitor recommended for spring application to control many annual broadleaf weeds as well as annual sedges. It controls large crabgrass but no other grasses, such as goosegrass. Callisto may be used as a broadcast spray between rows to control broadleaves and crabgrass without injuring the fescue sod. Callisto has both preemergence and postemergence activity and can be used in spring prior to bloom to control ALS-resistant horseweed at the rosette stage.
  • MOA 29: Alion (indaziflam) is a cellulose biosynthesis inhibitor recommended for fall or spring application to control annual broadleaf and grassy weeds. Alion has no effect on emerged weeds or established perennials. It should be applied before weeds emerge or tank-mixed with a postemergence (POST) herbicide to control emerged weeds. Do not use Alion on soil classed as sand, or with more than 20% gravel.

Soil-Applied Herbicide Rates (in Active Ingredients) for Common Soil Types

Graph of Soil-Applied Herbicide Rates

N/A = NOT LABELED (DO NOT USE).
1Use the lower recommended rate when tank-mixing with another pre-emergence herbicide, unless annual grass pressure is severe.
2Use one-half the recommended rate when tank-mixing with another pre-emergence herbicide.

The 2021 Commercial Blueberry Pest Control Recommendations for New Jersey will soon be available on https://njaes.rutgers.edu for rates and additional information. The information above is correct to the best of our knowledge. Other formulations with the same active ingredient as some of the products listed above may exist that may or not may be labeled for the same uses. Always consult the label before making pesticide applications. Information was current as of March 5, 2021

Filed Under: Blueberry, Uncategorized Tagged With: , ,
March 5, 2021

Webinar for Annual Dicamba Applicator Training

BASF will host several Live Virtual Webinars for annual dicamba applicator training.  his training is required for Engenia herbicide and other dicamba products approved for over-the-top (OTT) applications on dicamba-tolerant soybean and cotton. Dicamba training is also offered through an online module.

These webinars are designed to learn about new application requirements and label enhancements for the 2021 season. Applicator training and certification can be obtained in multiple formats based on your schedule and needs. Due to COVID-19, dicamba applicator training will be primarily available through online offerings such as a self-paced training module and live virtual webinars.

Please visit http://www.engeniastewardship.com/ for training options.

Please also review PPA previous post on The 10 Best Management Practices to Avoid Herbicide Drift!

Live Virtual Webinars: 

There are a total of 6 remaining events that are scheduled to occur every Tuesday @ 10 am eastern with the next one scheduled for March 9, 2021. Attendance is limited to the first 250 attendees per event so register early for the event that best fits your schedule. Live Virtual Webinars are scheduled for:

  • March 9, 2021 @ 10 am eastern
  • March 23, 2021 @ 10 am eastern
  • March 23, 2021 @ 8pm eastern
  • March 25, 2021 @ 10am eastern
  • March 30, 2021 @ 10am eastern

Online Module: 

This option will take approximately 1 hour to complete and contains a quiz at the end of the module. Once the module is completed a certificate is displayed that should be kept for your records. You will have the option to print and/or save your dicamba certificate. It is recommended that you complete this training on a web browser through a computer with a reliable internet connection.

As a reminder only certified applicators may apply Engenia herbicide or other OTT dicamba herbicides.

Filed Under: Commercial Ag Updates, Field, Forage & Livestock, Uncategorized, Vegetable Crops Tagged With: , , ,
March 5, 2021

2021 Mid-Atlantic Field Crop Weed Management Guide

2021 Mid-Atlantic Field Crop Weed Management Guide

The 2021 updated version of the “Mid-Atlantic Field Crop Weed Management Guide” is available. This guide is produced by Penn State Extension in cooperation with weed scientists from University of Delaware, University of Maryland, Rutgers University, Virginia Tech, and West Virginia University.

The guide covers weed management  for field corn, sorghum, soybean, small grains, and forage and pastures. Information concerning the use,  restrictions, and recommendations of burndown, preemergence, and postemergence herbicides labeled on these crops can be found in the guide, including relative effectiveness data from locally conducted research. Description of the various premixes as well as guidance for  managing troublesome weeds are also part of the guide.

The guide  can be ordered on-line at https://extension.psu.edu/mid-atlantic-field-crop-weed-management-guide. Available to order are the paper copy for $10, the digital guide for $8, or both a hard copy and pdf for $18.

 

Filed Under: Commercial Ag Updates, Field, Forage & Livestock, Vegetable Crops Tagged With: , , ,