Greetings from the Veg IPM team! Read more for the latest pest and disease updates.
Sweet Corn
Sprays should be initiated at 10% green silks, and continued in intervals as determined by your local CEW pheromone trap counts. Refer to the map below to see this week’s CEW pressure. In South Jersey, the pressure is quite high (3-4 day spray intervals), and North Jersey pressure is lower, but beginning to increase in pressure. Remember, when the average maximum temperature for the next 3 days is above 80 degrees, shorten the spray interval by one day. Rotation is important for avoiding resistance, and there are four IRAC groups that are registered in silking sweet corn: 1 (carbamates), 3 (pyrethroids), 5 (spinosyns), and 28 (diamides). Corn earworm is at least partly resistant to several pyrethroids, so a spray program should not rely solely on pyrethroids, although they can be useful in tank-mixes or as pre-mixed products, such as Besiege or Elevest (Group 28 + Group 3). For detailed information about resistance and potential spray programs, the University of Delaware has an excellent resource on corn earworm management.
Spray intervals based on nightly pheromone moth captures for the southern part of New Jersey. Note that not all locations in the IPM program are currently trapping. This map is based on the following thresholds: 0 moths = 6-7 day schedule, 1 moth = 5 day spray schedule, 2-20 moths = 4 day spray schedule, 20+ moths = 3 day spray schedule.
Caterpillar pests in the whorl and tassel stage. We are finding fall armyworm (FAW) in South Jersey at low rates (Atlantic and Burlington counties). We recommend being on the lookout for FAW. Young larvae will cause damage known as “window paning”, in which the top surface of the leaf is eaten away, leaving behind thin, white, membranous-looking scratch marks (A). As the larvae get bigger, these feeding marks become more ragged (B). The damage can look somewhat similar to European corn borer feeding, but FAW damage will be more severe and will lead down into the whorl. The caterpillars have a dark head capsule with a distinct, inverted Y-shaped suture (C). They can also be identified by four dark dots arranged in a square on their last segments (D). We use a treatment threshold of 12% fresh feeding damage in pre-tassel corn. Below this level, treatments for FAW are unlikely to pay off and can flare up aphids. For treatment, we recommend using products other than diamides (IRAC Group 28) when treating whorl-stage infestations, as diamides are important to save for silk protection. Effective products include Lannate (Group 1A), Radiant (Group 5), Intrepid (Group 18), Intrepid Edge (5+18), and Avaunt (Group 22). Note that Avaunt can only be used through tassel push.
Fall armyworm identification: A) Windowpane damage, B) ragged holes, C) larva with inverted “Y” on head capsule, and D) larva with 4 dots arranged in a square. Pictures by Maria Cramer.
Tomatoes and Peppers
Thrips and TSWV. Thrips and tomato spotted wilt virus (TSWV) are the main issue in tomatoes at the moment. The worst problems are in south Jersey, but isolated cases have been found in Middlesex county in peppers and tomatoes. Growers should scout regularly for TSWV (see figure below for an example of a plant with TSWV) and rogue out affected plants to reduce risk of secondary spread. Often multiple plants will be affected and symptoms will appear over a couple of days or weeks, so keep checking the planting for plants that need to be rogued. If you need help identifying TSWV, please contact us with the form at the end of this post.
TSWV symptoms: A) Stunting of infected planted compared to healthy plants, and B) closeup of affected foliage showing curling and brown lesions. Pictures by Maria Cramer.
Second, scout plants for thrips. This is important even if you have already sprayed for thrips, because you need to know how well the spray worked. Unfortunately, there is no established treatment threshold for thrips, especially when TSWV is a risk, although one adult western flower thrips (the TSWV vector) per flower has been suggested. In the veg IPM program, we typically scout foliage for thrips, as these are most likely to be western flower thrips, but at this point most of the thrips we are finding are western flower thrips, so we advise monitoring both flowers and foliage to get a sense of thrips pressure in a planting.
Thrips on a tomato leaf. Picture by Maria Cramer.
In cases where TSWV is scattered throughout a planting and thrips are present in high numbers in flowers, weekly sprays can help slow TSWV spread, but will not stop it. If you are spraying regularly for thrips, make sure to use effective products (see our previous article for a chart listing products and efficacy) and always rotate modes of action and follow seasonal limits.
Pay attention to fertility: over-fertilized plants are more attractive to thrips.
If late plantings are planted near earlier plantings that have TSWV infections, spread to the late plantings from thrips is highly likely. You may need to initiate sprays sooner on these later plantings under these circumstances, and other interventions, like using metallized plastic will provide less protection. Additionally, destroy older plantings as soon as harvest is done or if management becomes non-economical in order to prevent spread to later plantings.
Spider mites. We have seen elevated spider mite counts in some tunnel tomatoes and peppers. Otherwise, tomatoes and peppers have been relatively free of aphids, stinkbugs, and caterpillars. When sampling spider mites on tomatoes, check 10 upper leaflets in at least 5 sites per field. Typically, the treatment threshold is 2 mites per leaflet on average (one of the individual leaves that makes up the compound tomato leaf). Keep in mind that in 2025 we saw miticide resistance on farms where crop rotation was limited and the same miticides were used for multiple years — If you apply a miticide, check whether the application has decreased mite populations, and if it did not work well, do not keep using it. Rotate between miticides and only treat when above threshold. Some products for spider mites in tomatoes include:
- Nealta (group 25)
- Oberon (group 23)
- Portal (group 21A)
- Agri-Mek (group 6) *7 day PHI
- Kanemite (group 20B)
- Acramite (group 20D) *3 day PHI
Spider mite stippling on the top of tomato leaves. If you turn the leaf over, you will often see spidermites on the lower surface. When spidermite infestations are large they may be on both surfaces of the leaves. Picture by Maria Cramer.
Soil-based diseases in tomato and pepper. This week we have seen and heard reports of an uptick soil-based diseases in tomato, including southern blight, white mold, and phytophthora. The flooding this week may also result in movement of phytophthora in fields, so be on the look out. If you have healthy plants that suddenly begin wilting, start by examining the soil line for lesions or breakage. Phytophthora typically has a dark lesion that extends up from the soil line. Cutting open the stem lengthwise will reveal dark streaking in the stem.
Tomato plant with phytophthora symptoms: dark lesion extending up from the soil. Picture by Maria Cramer.
Southern blight and white mold have similar symptoms, but have distinctly different appearing spores. To differentiate them, use the following resource: https://plant-pest-advisory.rutgers.edu/diagnosing-southern-blight-and-white-mold-in-tomato-and-pepper-2-3-2/
For control of southern blight, white, mold, and phytophthora, see the 2026/2027 vegetable production guide. For southern blight and white mold, immediately removing plants upon diagnosis is critical to prevent the pathogens infesting the fields/high tunnels long term.
Cucurbits
With the continuous wet weather this week, we’ve started to see anthracnose showing up in many fields. Anthracnose is a fungal disease that can affect many different vine crops including cucumbers, melons, and pumpkins/winter squash. All above-ground parts of the plant can be affected by the disease. On the foliage, anthracnose lesions begin as yellow or light green circular spots that form on leaf veins. As the lesions grow, they turn brown or tan. If left untreated, the fruits can develop unsightly, sunken lesions. It is important to begin regular fungicide applications after anthracnose is detected. Protectant fungicides (e.g. chlorothalonil or mancozeb), and several other fungicides can limit the spread of the disease. Consult the Mid-Atlantic Commercial Vegetable Guide for a list of appropriate materials.
Symptoms of anthracnose on a pumpkin leaf. Note circular lesions on the top (A) and underside (B) of the leaf. Sometimes the lesions may be surrounded by a pale green halo (C). Photos by Amanda Quadrel.
We’ve seen an uptick in squash bug eggs in many plantings this week. Typically, pumpkins that are beyond the seedling-4-leaf stage are not heavily impacted by squash bug feeding. However, if you are scouting your pumpkins and find that your plants have more than one egg mass or nymph cluster per plant on average, it may warrant treatment. Materials for squash bug treatment include Sivanto Prime (IRAC 4D), Cormoran (IRAC15+4A), Incipio (IRAC 30), and various neonicotinoids and pyrethroids. Treatments should target the nymphs, and coverage of the undersides of the leaves is essential.
Squash bug eggs (A), newly hatched nymphs (B), and an adult (C). Photos by Amanda Quadrel
We have also been spotting sporadic squash vine borer (SVB) adults when scouting fields. SVB tends to be most destructive in smaller plantings, or in plantings with giant pumpkins. A female adult will lay eggs singly on the main stem right above the soil line. Once the larvae hatch, they bore into the main stem, which eventually results in plant death. To protect plantings against SVB, applying a product at vine-run can be helpful for protection. Materials approved for SVB control include acetamiprid (Assail, IRAC 4A), the combo product Cormoran (IRAC 15+4A), and various pyrethroids. If treating for other pests such as squash bugs and aphids, some products such as Incipio and Exirel can also provide SVB control.
Squash vine borer larvae (A), adult (B), and damage (C). Pictures by Amanda Quadrel.
We have our sentinel plots for Cucurbit Downy Mildew (CDM) planted at the Snyder Farm in Pittstown and RAREC in Bridgeton. These plots contains two varieties of cucumber (a susceptible and resistant variety), watermelons, cantaloupe, and various types of winter squash. As of this week, we haven’t detected CDM. No new cases have been reported since June 25th in Georgia according to the IPMPipe website for CDM. If we detect CDM, either in our sentinel plots or elsewhere in the state, we will send out an alert immediately, but the IPMPipe site can be used to see the most recent sightings of the disease throughout the country.
As a reminder, the new 2026/2027 Mid-Atlantic Commercial Vegetable Production Guide is now available for free online (click here) or as spiral-bound hard copies that can be purchased at your local county extension office. Consult this guide for a more comprehensive list of materials that are labeled for specific crops and pests.
We want to give a huge thanks to our scouting team for keeping an eye on things for us throughout the season!
North NJ: Connor Colonese, Shayne Miller, and Cassandra Dougherty
South NJ: Alex White, Renee Carter, Peter Combs, and Kris Szymanski
Authors: Amanda Quadrel (Northern NJ Veg IPM coordinator) and Maria Cramer (Southern NJ Veg IPM coordinator)
Questions or comments? Contact us below:
